Dlink DGS-F1010P-E 250M 10-Port 1000Mbps Switch with 8 PoE Ports and 2 Uplink Ports

Dlink DGS-F1010P-E 250M 10-Port 1000Mbps Switch with 8 PoE Ports and 2 Uplink Ports

D-link DGS-F1010P-E is a robust and cost-effective PoE solution to provide power for your PoE powered devices such as IP cameras, CCTV, VoIP, AP etc

Equipped with PoE extend technology, DGS-F1010P-E has the capability to supply 802.3af/at PoE up to 250m with data transmission. Cost saving for long distance solution

D-Link 250M is enhanced with 6KV surge protection effectively guard equipment from lighting damage especially if use on AP/IP camera install outdoor or at higher position

With a flick of button, Isolating the downlink port to each other can effectively suppress network storms and improve network performance

DGS-F1010P-E allows you to create high priority for video streaming, perfect solution for IP camera/CCTV

The D-Link DGS-F1010P-E is a 10-port 1000Mbps switch with Power over Ethernet (PoE) support. Here are the key features and specifications of this switch:

1. Port Configuration: The switch has a total of 10 ports. Among these ports, 8 are PoE ports and 2 are uplink ports. The 8 PoE ports can provide power to PoE-compatible devices such as IP cameras, wireless access points, and VoIP phones directly through the Ethernet cables, eliminating the need for separate power adapters or cables.
2. 1000Mbps Gigabit Ethernet: The DGS-F1010P-E supports Gigabit Ethernet, providing high-speed data transfer rates of up to 1000Mbps. This ensures fast and reliable connectivity for network devices.
3. PoE Support: The switch is equipped with 8 PoE ports that comply with the IEEE 802.3af/at standards. These ports can deliver power up to 30 Watts per port, providing sufficient power to PoE-compatible devices.
4. Uplink Ports: The switch includes 2 uplink ports that can be used to connect to other network devices or to the network backbone. These ports support high-speed data transmission and enable network expansion.
5. 250M Transmission Range: The DGS-F1010P-E supports transmission distances of up to 250 meters using Cat5e or higher Ethernet cables. This extended reach is beneficial for installations in large spaces or outdoor environments.
6. Energy-Efficient Design: The switch incorporates D-Link Green technology, optimizing power consumption without compromising performance. It supports features like link status detection, cable length detection, and automatic power-saving modes to reduce power consumption.
7. Plug and Play: The switch supports plug-and-play installation, allowing for easy setup and configuration. Simply connect your devices to the switch, and it will automatically detect and configure the network settings.
8. VLAN and QoS Support: The DGS-F1010P-E offers VLAN (Virtual Local Area Network) and QoS (Quality of Service) support. VLAN configuration allows for better traffic management and enhanced network security. QoS settings prioritize critical applications and ensure smooth performance for latency-sensitive tasks.

The D-Link DGS-F1010P-E 10-port 1000Mbps switch with 8 PoE ports and 2 uplink ports provides a reliable and efficient solution for small to medium-sized networks. Its PoE support, Gigabit Ethernet capabilities, extended transmission range, and energy-saving features make it suitable for various network deployments.